75# postcard settings

Discussion in 'Xerox iGen3, iGen4, & iGen5 Digital Presses' started by peels, Dec 6, 2017 at 1:14 PM.

  1. peels

    peels tree killer :)

    Joined:
    Dec 2010
    Messages:
    964
    Location:
    southeast iowa, usa
    all,

    I regularly run a 75# postcard, in SMALL quantities... lately, a fefw have gotten big, mostly due to office errors-good times.... this paper is pretty dry and porous. seems like it should be fine...


    if I run for a long time, my external rollers are CAKED! made a substrate setting based on what I Was told the paper is...and measurements. but im missing something.

    looking through the recommended list, I dont see anything.

    any of you use a 75# postcard and have some good baseline settings for me to try?
     
  2. peels

    peels tree killer :)

    Joined:
    Dec 2010
    Messages:
    964
    Location:
    southeast iowa, usa
    got through the biggest run of it, solid red cards... by running 500 at a time, then cleaning the fuser. never hurt the externals...but still, a pain.
     

Share This Page