DanRemaley
Senior Member
- Joined
- 2010
- Posts
- 108
- Geo
- Pittsburgh, PA
I created a nice 4-Color bar.
1 - It has patches for a visual grey comparison to 50% Black.
2 - Patches of 25-50-75 to create plate curves on problem jobs.
3 - A 3% patch for showing plate wear and to visual inspect for double dot issues.
I also have the "wanted" SWOP dot area numbers for the RIP. (see attached)
One last thing - I have nearly all the 'Quality Control Scanner' sheets by Miles Southworth.
I can hunt for any item that your interested in researching - GCR - Grey Balance - ETC.
1 - It has patches for a visual grey comparison to 50% Black.
2 - Patches of 25-50-75 to create plate curves on problem jobs.
3 - A 3% patch for showing plate wear and to visual inspect for double dot issues.
I also have the "wanted" SWOP dot area numbers for the RIP. (see attached)
One last thing - I have nearly all the 'Quality Control Scanner' sheets by Miles Southworth.
I can hunt for any item that your interested in researching - GCR - Grey Balance - ETC.
