3302 inking problem

Discussion in 'Ryobi Printing Presses' started by denningmp3, May 19, 2014.

  1. denningmp3

    denningmp3 Member

    Joined:
    Apr 2011
    Messages:
    17
    Location:
    san diego CA
    Hello I am having an issue with my 3302 while printing tower 2 will not duct ink in auto if I select manual it ducts though. Any help would be great as I have had this issue before but cannot remember its cause
     
  2. printerdan

    printerdan Member

    Joined:
    May 2014
    Messages:
    21
    Location:
    S.E. Michigan
    Not an uncommon occurrence for myself. It typically (always) fixes itself quickly. I would ponder the rocker switch used is the culprit. You can swap out the switch for those intended for blanket washup.
     
  3. FSA

    FSA Senior Member

    Joined:
    Jan 2011
    Messages:
    313
    Location:
    Winnipeg, Manitoba
    i agree with printerdan the rocker switch in the older 3302 and itechs fail inside the switches often

    FSA
     
Loading...