transfer belt

I have this problem both on Black Only (K) printing and on CMYK color printing. The colors come out Light, the toner is not dense. (The attached photos are of Black and White printing, but if I print in color the result is the same with the 4 colors, washed out image. This happened after having...

I have this problem both on Black Only (K) printing and on CMYK color printing. The colors come out Light, the toner is not dense. (The attached photos are of Black and White printing, but if I print in color the result is the same with the 4 colors, washed out image. This happened after having...

I have two old Phaser 7760 machines. One is for parts the other I print with. I swapped in the accumulator belt assembly from one to the other to resolve a print defect caused by a hole in the transfer sheet. When I put it back together and ran a print it has short vertical magenta lines in one...

I'm using a Xante Ilumina DPP 502 with a DEP fuser installed so we can run envelopes a little easier. We bought the machine from another printshop that was closing down and we don't have a service contract. My issue is that we have only recently developed a problem with the machine. Up until a...