timing

  1. 2005 SM52 Stopping even while on crawl

    Hello, I am having trouble with our SM52. I slipped the suckers the other week on the chain and it was working perfectly before my week off the line on the control console said the papers were going in at perfect timing I had been running a job through without any issue. But on my week off it...
  2. Kris

    2008 CD102 Feeder Issues

    Does anyone know what the sheet arrival timing should be on a 2008 CD102. I have checked the arrival and right as the sheet hits the headstops I am showing around 190°. The feeder is a preset plus and we have recently been having issues with getting sheets to run. When a sheet finally jams it...
  3. Hamada 665CD Timing Issue

    This press had not been used in two years, I did not have this problem then. Printing impression is fine, but the timing while running 11x17 (probably everything) is off. The 11x17 feeds thru with no wrinkles or paper bubbling up, but the feet come down to pick up the next sheet of paper and...
  4. Re-setting timing on unit #1 - qmdi classic

    I would like to ask for assistance please. On UNIT 1 of my QMDI Classic, the oscillating disc that oscillates the 2 plastic rollers on the unit has come off completely. The "pin" that holds the disc in position has sheared off at the neck. The 3 countersunk screws are still in place but the...
  5. Quick master 46-4 / 46-2 Timing Pin

    I have been able to duplicate the mechanical timing pin for the QM Di and Im selling these if you are interested please email me at viper743@earthlink.net. Imagine the savings you could have by timing your own press. I beieve this pin will work for either the 4 color and two color presses...
  6. pm 74 sheet arrival timing

    wondering if anyone can tell me how to check the sheet arrival timing on a pm 74 2c.we are haveing a prob with always showing crooked sheet .i believe the prob is the sheet arrival sensors but want to check the timing as well.
Back
Top