problems

hi, im having trouble with the blade on my ideal 3610 just moving 5mm or so then making a click sound and stopping. it was working fine before. i understand this is an old machine and could do with a service but any help, suggestions or explanations welcome. ive included a video...

We've had 2 Iridesse units for about 15 months now and have had ongoing color consistency issues. Main problem is that we print a large number of business cards with a solid PMS549 backer for a customer. Color shifts within a run, from run to run and from day to day. Same file, same stock, same...

Hello, can someone help me with the Horizon SPF-20A machine. It does not initialize. And on its display it shows the message "Now Loading" and I don't know, so I need to know if someone can help me to solve this problem.

Hey Yall, Not sure if this has happened to any one else, but we have a cutter where the micro adjustment keeps slipping. We'll have our new girl cutting stock when the blade goes from kiss cutting the cut stick, to absolutely chomping into it. we can reset the blade to its proper position using...

Hey! My name is Mitchell Blakemore and I am a sales manager at Printing in a Box (PIAB). PIAB software offers a storefront website for your printing business. The website's content is highly customizable to fit every business model. The PIAB software comes with an advanced online ordering...

Hello Everyone, I am new here and I am reaching out to the forms to hopefully stop my problem. I have a Canon IRC9065 with Paper Deck, Punch Unit, Integration Unit, Finisher Unit and External Fiery Unit that has been having problems for the past month. First hardware where most of the...

Does anyone have a Canon lease through Canon Financial? We have a nightmare here - our CLC 4000 has been streaking, printing blurry and powering off for the past 2.5 years and after countless service calls with techs telling us they can't fix it, we tried to get out of our lease (we already did...

Has anybody problem with Laser driver boards on Heidelberg Quickmaster 46-4 plus Before few years one laser driver board has died and we have to replace. We buy a new driver board , but its too expencive , about 5000 EUR before few days died another board on the maschine , not the new one.

Please help !!! I have a Xerox DC12 with Fiery RIP and everything is OK with network and printing. When I go to Firefox and write IP address of the printer, the WebTools everything is OK. WebSpool show print jobs and everything is OK, work fine. Now What's wrong is that I have three...

Hello Our problem is this when we are running 100# gloss text the press feeds fine at slower speeds under 6500 sph When we speed it up it will run 10 to 200 sheets then it will stop feeding kick off impression, stay running the feeder icon lites up we have to go to the feeder and push the...

HI! I' m begging with printing DI 46/4 and i have a couple o f question about it. What are the most troublesome in printing from Heidelberg QM DI PLUS 46/4? What are the indicative prices of repairs? Prints on sheet 170g chalk full of print, 15000 pieces of SRA3, 4 +4. How long will it...

We have been having to pre-run a scrap piece of plate material through prior to processing any plates. If you don't there us exposed water drip run marks that start at the lead edge of the plate and fad out only after about an inch or two but it usually always falls withing our image area. I...

Seems that periodically the double sheet checking unit not set runs the press out. Usually happens with foil sheets. anyone have the same issues??? Ra 105 sheet fed.

Does anyone have color shift problems on this machine? Neutrals tend to go warm out of the box and after we had the tech take a look it prints too cool. Is there something I can do besides calibration and playing with the myriad of color profiles that I've tried? I just want the machine...

Does anyone with an XL105 ever had a problem with the impression grippers not being able to hold the sheets causing doubling?

we are currently running a SM 74 10 color,,,we have had some issues with the back of the sheets marking in the delivery,,was wondering if anybody has had the same problem,,,

We have an older Akiyama 4/28 that we are experencing problems with moray patterns comming and going on peoples faces. The pattern is not consistant from sheet to sheet, some sheets are fine and some get a pattern. I had the prep dept check our screen angles and they are on specs. The press runs...

We have a gto 52-z alcolor and the operator has to put about .015 shim under the tail edge quick clamp. Is there an adjustment that we could do to the clamp so he does'nt have to shim it. I thought before I go out and buy a new clamp, maybe someone might of had the same problem. If so please let...

Hi all, I have a Xante Impressia running 340mmx505mm Aspen plates and have problems with toner dropouts (hollow image dropout?) of varying degrees inside of characters and solid objects. Was told this was a quality control issue with the plate manufacturer thus am assuming this should be...

Hey guys what you think of this..This happened to me a couple hours ago. I opened up the job i needed to run on the moniter (to preview) to see if its all good to run.And when i opened it up,another job thats on the RIP opened up instead of what i had selected( the file name also changed).No...