pqc

Hello. We used to Komori lethrone S29 and PDC-lite II model. We got a communication error, cause unknown when we transfer a file. Please help me

After repairing one of the cards, the parameters were reset. I program all M1/M2 and TM1/TM2 and the machine works fine, but after turning off the power, all the parameters of M1/M2 and TM1/TM2 are reset again. The batteries on all boards are normal, the jumpers are also in place. Please help me...

Hey guys, Having an issue with a komori lithrone 40P. The computer that has the KMS software on it is having a problem sending ink key data to the PQC-S. The transfer gets halfway and then errors saying "communication failed, cause unknown". Has anyone had this issue and knows how to fix it? We...

Help. I have a 2005 Komori LS press with a X-Rite scanning densitometer. The x-rite computer went down recently but is back up. The port settings on the Moxa card has been scrambled since the crash. The x-rite computer is not able to communicate with the PQC. I know the Moxa card is...

Can KMS connect to an older PQC with a magnetic card reader for ink presetting…

2000 Komori Lithrone 428+ Coater:- 4 color, Size: 20 X 28", Komorimatics Damps, dedicated coater, PQC, Semi Auto Plate Changers, Plate Cocking, TRUE 99 million impressions, Royce Refrigeration/Recirculation, IR dryer, Preset, Sheet decurler, Plate Bender, Plate punch, spray powder...

A vintage (early 1980s) Komori PQC is struck as follows: 1) Plate register moves the plate up and down but the display values on the PQC don't change,i.e. the reading is struck at 0.47 for all units. The card is Nikki Denso made and problem is for all units. Any tips on what may be wrong?

Hi, The problem is of a L440 (estimated age 1984). It has registerion controls without cocking. Ink and water controls. Job program (not being used). The Lateral Registration does not work but it shows reading changes on console when registering from on press controls on delivery. Any...

Dear friends I run a Lithrone 526 of 1989 make. Yesterday in the morning when we started the machine PQC was not responding, however there was power in PQC. There was no control and movement in Ink, Cylinder Registration, Water Fountain etc. A local Komori electrical technician was called to...

Dear friends, I have a Lithrone 526 0f 1989 make. Today morning when we started the machine we found that the PQC is not able to operate Ink Keys. All other functions from PQC are normal. Today morning there was some fluctuations in one phase of main power supply line. I need help in restoring...

Hi All, We are a South African based printing company and are currently having a problem with our 426 Lithrone PQC, I was hoping that there was someone out in there in the forum that would be able to or know of anyone that will be able to help us out with the wiring diagram for this PQC...

we are in the south of Europe and quite new in the Komori world, but have 1 L540 with KMS4 coming from abroad with no instruction manual on use it consistently. We are starting to receive ppf profile from pre-press and convert with PCC but still far away from consistency, also we need to start...