powder

Hello sirs, my name is Richard from Matahari Print & Pack - Rolus Masterfount International. We are a small printing company and fountain solution manufacturer based in Indonesia and China. Our fountain solution is guaranteed to make ink dry faster (under 5 minutes average), reduce ink usage...

Hello. We have an Airtech quickdry powder/dryer system on our press. Recently we stopped receiving powder out of it. I rebuilt the dryer system and replaced the manifold in the spray system. All lines seem to be unclogged. When I use special function 04, i can turn the system off and on and...

Last time running my QMDI Plus I dropped the powder jar. It shattered. We got a quote for a new one from Heidelberg. $400! :mad: Does anyone know of any alternative places to buy one? That seems like an insane ripoff for a JAR.

I have a Ryobi 500K with the standard powder attachment. I was getting all of my powder at the first nozzle and almost none and the second and third. After taking apart and clearing a blockage in the tube I looked at the needle valves at the back of the spray nozzles. They have a scoop cut...

Hello. We are in the process of replacing our friction collator (PLOCKMATIC 310) by a vaccum one (should be a Horizon or a Duplo) One of the reason that lead us to this decision is the fact that we collate only NCR papers (12x18) and the printer that supply us use a lot of powder on the...

Hello! Wondering if anyone is suffering from spray powder buildup on the second pass of longer run jobs. We are in the middle of running a 40,000 impression project (20,000 fronts, then running the sheets back through). We have to stop every few hundred sheets to wipe the spray powder off the...

Our PM 74 operator has had problems with spray powder building up and causing a line in solids and a heavy coverage when he backs up a job. I suggested he use less spray powder on the first pass but he says it won't help. As he is doing it, he can back up about 300 sheets and has to wash the...

We have found clot of spray powder in delivery unit. It is adhere to everywhere in unit. And it is falling into printed sheet sometime. Does anyone found this problem before? Please suggest me how to correct this problem.

A fine powder sprayed over the printed surface of coated paper as sheets leave a printing press to prevent ink from offseting from one printed sheet to the back of the next while wet. Anti-offset power allows printing on media that is more difficult for the ink to...