Hello, I hope somone can help me I have a QM-46-2 press, I run Poly Plates. My problem is that no matter what type of ink or fountain solution I...
I am having trouble on a Komori 44SP resetting ink key. I have taken keys out and cleaned and reinstalled them but now I am getting flashing on...
I run a 4 color Solna heat set web and I have a serious issue. I am getting a lot of rollback or feedback of ink onto my water feed rollers. I...
hi again i need to do a re-register of the ink fountation but with all the tools,and gauges that this procces need. who might have those...
I want to over-ride the 'cover open' warning which interrupts the printing when I check what the continuous ink system tubes are doing [sometimes...
we have a problem on our 74 with ink building up under all 5 duct foils. Its messy so would appreciate any suggestions.
hi mrs heidelberb how are u ? every week when i clean the section and move up the ink at the duck i see that the ink is maybe with little sand of...
hi mrs heidelberg today i remove all the ink fountation at the blue section.i clean all with grease and then put in the section.now i cant do...
got some samples,gonna try it out, What do you guys think of it??? I use TOYO med ink now,,and i have no problems with it..
some of the ducts have sticking keys and are uneven Can any one tell me best way to set the keys On a 526 Thanks
hi I work in GTOZPS and my question is about Alcolor dampning system *what is the range between the catch up and much water on the...
Anyone use either of these products,what problems have you had and what solutions have you came up with?
does anyone know how to prevent ink transferring off uncoated paper onto your hands? my printer has just suggested lamination which makes it a bit...
We have started having a problem with cyan ink feeding through to the yellow ink train And turning the yellow green Any ideas the press is a...
commercial ink mixers for sale 1 baldwin, 2 minarik, excellent condition.
We have a SM52. Recently, unit number 2 has developed a disturbing issue. The ink coverage from the gripper to halfway down the sheet has LESS...
Ink stripes / blank stripes replica of Gear wheel appear on Blanket and on printed sheets on my 14 Year old TOK. Do I have to adjust bearer to...
So i have a bad ink form roller, D, to be exact and i know my boss wont buy a new one for awhile. So I can either get a good stripe on the plate...
Hi from Brasil. I always try to improve my print quality, and searching on the net i found this url:...
Hello all, I am an artist from Durham England and have been painting for a number of years. I am now looking to explore the possibilities of...
