Hello All, Is there any way I can set the USER ID field in the Print Job History? the printer is connected to an office network and I am...
I have a print job that I need performed by a Canon ImagePRESS C1+ for its clear toner capabilities. Does anyone know where I can get this done...
replaced all imaging units (except black) printed few hundres sheets then NO Image! it prints magenta and black but only about 1" - 2" wide from...
I am running a Printmaster and am trying to run 11x17 for the first time. The end part of the image is not showing up on the blanket and in turn...
Our small publishing company leased a new C5180 which worked fine for a few months, then it started making screeching sounds. The maintenance...
I am running a Ryobi 3302M with Mitsabishi direct poly plates. when i run this monthly newsletterr 16,000, 11x17 #60, Black & 185 I always have...
Hi all, I faced this 2 unsolve problem, We spent hours & days, tried many things but still not able to solve this problem, anyone have any ideas...
Please HELP! We have developed a small spot approximately 3 millimeters in diameter that does not image on the 4th unit of our QM4-DI classic. It...
:D Hi evrey body! I have a problem when I print mor 3 quantity like 100 sheets ,the printer make 10 copies right & 10 copies wrong ,Pleas tel me...
I am printing from a Mac, running Snow Leopard. I have tried outputting the same file from Quark 7.5 and Indesign CS3. Both outputs give me...
Hi. I m running a 1985 sm 102 5color press with double perfector...i m getting a problem of double image in 1st printing unit which is normaly...
I was running my 1987 K 626 today, printing a booklet multiple pages up on a 100 text 19x25 - run this all the time.. After about 2000 or so...
Has anyone heard of this Zanders paper? Is it as good as rumour has it. It's described as 'silver image supergloss is a cast coated fine paper...
Hi.I have a small slaughterhouse , and I would like to print a picture with a little meat and salad etc on my truck . I assume the printing will...
on my 2 col ryobi b3 press( 2yrs old). When putting the correct packing its not enough squeeze for 80 bond .so added more and now have different...
Hello, I am using a ryobi 524 H and i have a problem The black print is double imaging as it goes through the other units when i am printing...
We occasionally experience a double image on the black unit with type near the tail end of the sheet or on 1 side of the tail end of the sheet...
I have a Heidelberg QMDI 46. From the operator side to the non-operator side about 4 inches from the trailing edge, there is a yellow line...
Has anyone installed the new image control from Heidelberg and if so how is it working out and what should we look out for ? thanks
Hello everyone, can I ask someone about C1 printouts looking like Burnt Image from left (dark) to right (light). More dark and yellowish on the...
