help

Hey all my muller martini bravo was having an unusual error with one of the feeder kept showing a machine fault on a feeder I wasn't using and it wouldn't let me do anything. I turned it off and back on and it had a boot up error i checked connections on the back and there was a small battery...

Hi everyone I was asking for help on my SM52 delivery table is only going down and will not come up after changing piles has anyone encountered this and would be so kind and point me in direct what to look for or where the problem comes from I have checked all the limit switches are working OK...

Hello Everyone, Our print shop has an older Heidelberg we are preparing for sale, but we do not know how to identify the make/model of the press. It's been out of commission for about a decade and we would like to find it a good home. It still runs and was a solid machine in it's prime. Any...

Hello all, I bought a used "Nagel SP 100 Plus Online" (booklet square press) and unfortunately it did not come with a manual. Although it's a fairly straight forward machine, I'd still like to have an operating manual for my team. Since Ernst Nagel (the manufacturer) sold the patents or whatever...

I have trouble with adjustment of water form roller (8 on the included picture). The only way I can get the printing press to print is if I set the water form in such a way that it is always touching the fixed roll (one between 8 and 9). If someone could give me instructions as to how to...

So I have only been able to find solutions for the clamp/knife being stuck down, but I am stumped on this one. Ideal 4850-95 EP took off electric cover, K1 and K3 both go down when buttons are hit, but nothing happens. when I manually hit K2, there is a terrible whirring sound, like the motor...

Hi, I have recently purchased a used SM-74 2010-2011 model for colour printing. The machine was properly installed by the engineers and is now in production. The machine has 5 colour units plus one unit for the coater. However, my operator is facing issues in using the AXIS CONTROL feature of...

Hi, I have a Focus Sapphire Jet Plus UV Flatbed Printer with the Epson L805 driver but there is always an error. I cant even print :( Sometimes the error is a paper load, paper jam oder just error and all three lights are blinking. Maybe you have an idea because i am pretty disappointed and...

One of my operators was making plate when suddenly the plate that came out was not centered. He did not change the setting or make any changes to the platerite machine. Is this a mechanical issue or technical issue with the calibration because no changes was made to the setting of the machine...

My company currently own a FS-500-P2N1 Focusight. However there is a problem where the machine sometimes work for a full day and the next day the LED light at the back shows 1 red light or the capture card. The manual indicates that it is a camera problem but there is no problem with the camera...

Hi Everyone & Greetings to All.. I Purchased a Machine Heidelberg GTO-1 52 last week , Machine is Beautiful, But I m not Able to Run it , Kindly Help me.. I Did not Know How many safety Switches are there and what are the main factors that i miss after installing it.. its 3 face.

We have used up to 14pt Synaps (Nekoosa product) on our machines (Konica 1085, 6085 and 1052) with gorgeous results. This ThermaTac is from the same company and I know it should print on our machines but for some reason the 12x18 sheet will leave the feed drawer but jam in between the drawer and...

Has anyone ever had this fault code before? Pre Clean HVPS non specific fault that's what shows up on the administrator section. Trying to figure out what to do in order to resolve this Thank you

Hello, New to the forum and pretty new to color & UV printing. As the title states I have a Mimaki UJF-6042 MKII and we are having issues with white blowout. Meaning lots of extra white appearing around the graphic. My sales rep tells me that it is static, but we are doing everything...

Hi, I have Ryobi 525 hxl, problem is that machine can not be started and monitor shows me this. Any body who has similar problems?Any solution? It would be great if someone could really help. Regards

Hi all, I have printed some business cards on 350gsm ColourPlan Pristine White (Buckram Embossed) and the colour is different from the Operator side to the back of press, i am wondering it the writing head could be dirty but im not sure on how to clean in on a 5600 i know its easy on a...

Hi there i am new to running the HP Indigo 5600 and was wondering if you guys had any tips / tricks to putting a new blanket on i am use to the 7800 way which is very different indeed. Thanks in advance

Wondering if anyone has any solutions to lower the visibility of the 3/4 bump on the 5600?