Try raising the head stops up.
The original post is from 2010. I think that company has closed.
I work on a Komori 28 that has 115,000,000. Let someone said. check the machine before you buy. The Komori is a perfector. It only prints up to...
Hi, Is there any place in the United States that will rechrome the dampening pan roller? Have one the the chrome has flaked off. thanks.
Get a high rub resistance or label/carton varnish from the ink maker. I use this on solids and labels on uncoated stocks. Almost bulletproof.. I...
The feeder head on our 628 is not moving on auto preset. The side guides move. We can move the feeder head using the fine adjustment. Anyone...
Worst thing ever. If you got coating on the cylinder bearers and they dry. You'll hear it when the press goes on impression.
If you haven't fixed this already. There is a certain way to do it on the touch screen to get the machine back into the correct position. you need...
I agree with what FSA said. One of the form roller is moving side to side.
Did this once and hope to never have to do it again.
Are you using stay open inks? Sometimes that can cause problems. Dull/Matte stock has a tendency to do dry real well. Its the surface of the...
If you have good results the first weeks of use then it starts to go bad. That mean the blanket has lost its gauge a bit. Add a little more...
Old timers would put corn starch into ink to help it from offsetting.
What do you mean by skiing?
Yes, it should have the tape recorded if it doesn't have KMS.
CPC is Heildelbergs and PQC is Komori.
Just wondering if you cleaned out the filter for the slow down wheels. Powder gets sucked up and the slow down wheels don't suck. Also on the side...
I was running a 1998 6/28 and Komori replaced all the gripper bars. there was a problem with them having cracks between certain serial numbers.
Harris sheetfed presses.
No one has mentioned Harris presses. The few I seen were pretty bad.
