Only way to increase fuser oil is to change Metering blade with a different profile.
You need to set system up for "Collated Sets". What you are getting is "Un-collated Sets or Stacks"
Peels, Some months ago, We also had random skewed prints with out any fault codes. After lots of cleaning and service calls Xerox ended up...
Kiran04 Set up instructions to Enable Igen3 to run Digital Magnet Media. Log on to “custact” level or higher. Open Diagnostics Window. Select...
Ralph: Inconsistent color sounds like "Image Non Uniformity". Must run "DC614 - Image Uniformity". By "Fuser roll discolored" do you mean "Gloss...
Kiran04 Yes Sir. Angel
Are you following proper Start up procedure? The only time we had this problem was when 1st shift operators did not follow Start up procedure. Angel
Have you tried to clean Steering Sensor Array (Q1107). Is stock properly loaded with curl down?. Are you getting any jams in stacker?. Angel
Did you clean Patch Generator (XPE-09-3503)? Also,You may have a bad center ETAC. (XPE-09-3167). Angel
Sounds like your media attributes for cover stock require system to warm up in order to have proper fusing. Try to have both media attributes...
Did you check Fuser Interlock switch. It may have tripped. See attachment. Angel
I hear you. Not one of my favorite things to do following RAP late at night!
You may want to swap charge station 3 with charge station 4 and see if your problem moves to station 3. If it does may be as simple as a bad wire...
Last time I had issues with XPE-09-1100 it was due to marginal OB ETAC sensor. It will not even pass DC951.
My work aroud for Transfer Detack PS Overtemp / Shield Faults (XPE-09-3061 & 3066) I have also chased this issue on cold weather when RH is not...
IOP setup is for Image on Paper registration. If your Image on Image is off, you need to perform IOI registration. Good luck lopeza
Feel your pain!!! Angel
What's the fault code? Did you have to open Fuser Drawer to clear a jam? Could you have tripped Fuser Safety Interlock Toggle Switch? Angel
Peels I remember the good old days when I ran a Xerox 9700 Laser printer that had a Selenium PR Belt. Scratches you could get rid off with an...
Your boss and my boss must have gone to the same management school in respect to Monkeys ability to pres the start button. To this day he has not...