Try adjusting your decurler in Diagnostics to get the sheet to lay flat as it is coming into the stacker.
Had this problem a few times. Only seemed to happen on 80# coated text stock. The problem was the TAB blade was bad. Changed it and we were good...
A while ago some fellow was touting a product called Fuzer Tabs that would stick with our fuser oil. Go to top of this page and search wafer tabs...
You can correct the level in the tray if it is cocked, by closing the tray with the same paper inside. While the elevator is trying to rise,...
Try looking real close at the TAB blade for little nylon fibers that maybe coming in contact with the PR belt. I have also had success with...
I think what happens is fuser oil is transmitted to side 2 as it passes over the pressure roll when printing the first side. When the second side...
I have had white lines appear in fine screen areas after putting on a new pr belt. My solution has been to uncouple the belt, pull it halfway off...
In the IOP window reenter the default reference numbers. It should allow you to run sheets through the machine and make your calibrations. With...
Guys, I've found that if you go into PSIP Diagnostic - Stackers - NVM Groups and select Purge Tray. You can change the value of the sheet count...
Thom, are you running uncoated stock. Igen 3 and 4 are prone to toner transferring on to the external rolls after maybe 500 or 600 impressions...