are you able to get Ph readings and/or TDS readings (total dissolved solids) ?
Sounds like you are getting an overheating problem which could affect the power supply and/or circuit boards. Take the control box cover off and...
You definitely need the wheels for the friction feed. The feed table should come up with the feed rollers down
If you're determined to use that press and you have a digital background you need to know about ink tack. Tack is the ability of ink to split....
Sounds like the impression cylinder is still making contact with the blanket cylinder not allowing the impression cylinder to move. When making a...
Let me know if this helps
If your water form is disengaging while in operation , I would look at taking the water form out and lubricating with grease on both ends and...
Are you still having a problem with your T-head water system?
I had not checked my school email in a while. I just got the thread attached to my email as I was submitting grades from spring 2020 for students...
Thanks to COVID causing low enrollment I have the Spring semester off. If there are any ABDICK questions I'm available for discussions.
I Hope I was able to help
What is the ph of the fountain solution it is critical to operation and rollers glazed will cause similar problems.
Still having a problem?
Glad you fixed it . I need to read ahead before replying
What model press?
On a 9840 it could be mechanical which would be hard to explain, I need to go to a customer and take pictures to show you or electrical. On the...
Check Form Roller Pressure to Plate. Adjust upper form pressure to plate is a 1/8 inch stripe, Lower form roller pressure 1/8 inch to no more than...
Just a couple of latching adjustments
All 9810s have an AC motor. 9910, 9870, 385, have DC motors. Sounds more like a variable speed pulley problem, worn or dirty, rusty or all the above.
No the 9810 does not have this feature, its just a little latching adjustment on the non-op side
