It's plastic so I'm sure it's safe. ....
If RAM oil is really bad I've had light paper stick and jam before. Airknife a little tighter works better for thin stock. But generally it...
2-3 bottles / day is about right. You can adjust purge settings in NVMs which will use more or less carrier depending on your needs. 80 (better...
Does it happen on all stocks? Lighter paper is more easily affected by static/etc. Reducing static will prevent dog-earring. If on heavy stocks...
The TE kick happens to me quite a bit. But it should pick it up and straighten out in time for stacking. Late to VGT entrance or exit sensor?...
Had the opposite happen before. Was adding Magenta instead of removing it. Technician fixed it, he did a bunch of things. Center ETAC, TC...
Speaking from an operator perspective I would say most companies like to hire operators as cheaply as possible. The igen4's and up are big...
Thanks guys. Back to 20% today. I guess it was just a long streak of cold/dry weather that hit us. Nothing we could do. We used a couple...
*edited for format / update 1. Getting a mottled transfer for all colors, Magenta is worst, Black looks acceptable (assuming due to timing from...
I'm back (for the summer)! Yes we run pre-printed stock all the time on the igen4 and fuser oil contamination is normal. It doesn't show up on...
Higher coverage jobs lead to more buildup, do you typically run a lot of that? Your tech can do a web/external roll contact arc adjustment. If you...
Just as MarkD said, the only time I have problems is when those two rollers on the bottom aren't wiped down very good. Other than that, IDKMYBFFJILL.
Cheap cheap. I never understood why they're so willing to pay a million dollars for a machine, but the operators nothing. Why hire experienced...
Aww, no more silk stock and car wax on the PR Belts! I bet you miss it already ;)
Agreed with Mark & peels "less is more". It's a lot of work to prevent all problems from happening. It's easier (and in many cases more efficient)...
Yeah there are a lot of issues with freeflow. We run a lot of volume, and freeflow after a while gets buggy and requires a reboot. We've tried...
Hard to picture what you are describing. What do the marks look like?
lol
Apparently, the new software upgrade that Xerox forced upon us contains a password change that when it communicates with the server it does not...
Following up, these faults returned with a vengeance and we had been dealing with them for months...until yesterday that is. The Magenta ROS...