Follow our day to day antics if any of you guys need local advise or help just give us a shout https://www.facebook.com/LLS.Heidelberg?fref=ts
We have had the main damper form roller journal seize on a number of occasions the easiest way to check is remove all the dampers and just fire...
I did not say hundreds of problems I said hounded with problems like pan roller issues suction sidelay issues I could go on and on but you could...
cd 74 will cost you more but early ones are hounded with problems
I think you will find anyone releasing any service manual to a non Heidelberg employee would be in copyright infringement there fore if found out...
you will find the kompac will be 100 times better than the dds worth every penny in my opinion. when dds first came out heidelberg had that many...
I have never heard of anything like that
one quick trick you can try that might help make your roller stripes 3mm instead of 4 or 5 mm this works a little
sounds like the take off mark to me a lot of mo suffered from this.. there is a trick that can be done to reduce the marks but it does not always...
check the roll pins that hold the journals on they might be gone
I assume with the age of the press it as got motorised brass style side lay if it has then it has a small lever underneath with a roller bearing...
just got stock of sm52 delivery bars
they are actualy easier to set than a gto as all the top train are spring loaded just check your operating manual but one thing big to remember is...
I would always try and run the paper landscape as it less likely to kick around you used to be able to get extended side lay parts for running...
well explained its easy for us guys tho because we have done it loads but he might cause himself more headaches by doing it if not set up right...
it is not a job I would suggest you try yourself but like I said if you dont have any mis register front to back it not going to be your feeder...
Like exheidmech said the knob on the side is just micro adjustment. If you are not getting any front to back mis register then it can only be...
then you need to just set the height of your side lay on the thumb screw do it so that you can just get two sheets under the lay that should do it
Hi you should be able to feed the sheet in second time round without adjusting anything how olds your gto? when you said you are adjusting your...
Bit of a strange thing to say Heidelberg have been world leaders in building printing machines for the past 100+ years