cracking If you think you may have a heat issue,try turning off the dryer completely. Crank up the powder and run a 3' lift. Take a lunch break ....
banding Have you been able to solve this banding problem?
Turbobotom, If you don't agree with my post than respectfully disagree. But calling me "ignorant' , Talking out of my ***" and "God help the...
I'm sorry if I came off like an old stick in the mud on this issue, but this kind of horse play is not permitted in my pressroom. It will only...
Excellent definition of a ":" type box STE by "IMAGEPRINTING" ,also one more thing that I may point out ,is that a RTE will actually nest...
FFR428 Please Let me know if you know anyone that is out of kindergarten. I may have a job for someome this actually interested in being a...
Notagroomer is correct once more, I swear to God I must have trained this guy. Run your black down fist then yellow on the first pass. Then ypu...
Verbena, Ive been doing this for 30 years. Your sequence for process work should be k,c,m,y . Dot gain is not an issue with direct to plate ....
tel your ink maker to reduce the frickin tack of your process yellow! Rod (old school)
You're running your black down last? Never heard of it. Try switching you sequence. Rod (old school)
If you have managed to keep your job for 3 years ,your already good kid! If your doing the same job and producing just as much work asTHE OTHER...
your transfer gippers need replced or adjusted. The pads are worn down. The sheet slips under blanket pressure thus causing your moray. Rod...
again "NOTAGOONER is correct.Rod (old school}
Not a gooner is correct. Blk and yellow fist pass. The reason is not really trap related though since you are going to dry trap the second pass....
your chromes are probably permanently sensitive if you have used febo clean on your damp system. If the crome loads up with ink, the system will...
htnj
first time (warning) second time (unemployment line) Rod
I don't use the metal clip to keep the rubber end piece in place at all. We do a complete wash up ,taking the chamber off and completely clean it...
your upside down on your cyan -magenta values, but then again what do I know after 30 years. And you say "thats if i use it at all" good luck in...
Dan is right on several points. If your not running enough ink, your water will start to over take the ik and you will be up and down and unable...