Dear all, I have a roland 201 very bad quality screen. The screen looks fine on the plate but not as good on the sheet. We changed all...
Thanks NimeshSilva, I did that and looks fine but the proximity sensor located at c. 555 mm may be the culprit Will keep an eye on it and will...
Hi All, Need to know how to calibrate the back gauge to the correct position. I have an error of 0.35 mm and can't find how in the manual that...
That is exactly the issue, but the jackets caliper can be between 0.26 to 0.3 mm. (0.01 - 0.0118). The machine is from 1986 and I don't know where...
Does anyone know the CPC 1.02 codes please? mail: mikadopress@gmail.com
I have a 2/3 SM 102, my first and second unit print is shorter than the rest units. Packing is the same in all which is 0.6 for the plates and...
I think it is all about the spine finish, Is your cutter is sharp; Is the clearence between the cutter and the back rest is correct etc......
1/4 of an inch is good, the problem belongs to the glue film thichness that should be about 0.5 mm
The roller should be 0.5 mm to the spine
Might be from the photocell of second unit What model do you have?