can I run without the X roller
I have figured it is A water issue . the damp roller seems to be running faster than before is there A way to slow it down from the console Glenn
black ink not drying I am printing on top of aqeuos coated sheet and using oxi ink four day and still not dry ???
Is that for smashes of the blanket or latency ?
Hello has anyone herd of Enviro Image Solutions they claim to be able to rejuvenate printing blankets from smashes to latancy image , they have A...
Thanks for your input . We have been printing on theses substrates for quite A few years now but seem to be experiencing troubles with drying and...
Hello I have been looking at trying Taniguchi Ink, their Oxidizing inks to print on foil metalized paper. Does anyone know anything about their...
Thank you for the info ,Is the cost of the two systems the same and what about the consumables Thanks Glenn
Hello , We are looking to going with UV ink what are the differences between HUV and LED-UV don't know much about either...
Hello I am hoping can help , We have A chamber coater H/B ever time we put A new doctor blade in it seems to were the bevel the opposite way that...
Thanks for the info do you know what RT stands for or what is ? we are already use an oxi black with low tack Thanks Glenn
Hello I an going to be imprinting on top of AQ coating but as we tested it the print does not seem to lay down very smooth it is A solid black...
Hello We have also had cracking in the past but never really figured it out . we will turn up the fan pulling the gases and moist air thanks for...
have you tried using felt ends that are impregnated with oil . We us them and never have A problem . Also to much presser will cause it to leak...
I hear what you're saying but its also the accuracy no two pressmen read A strip the same Glenn
Hello, I have just found out about a new system for setting nip on rollers . Its called DIGINIP. You just roll in the strips and it digitally...
We needed to re-place them becuse they were leaking and the making lots of noise and you could feel vibration and wobleing around like crazy . We...
We use the printing company (Rycoline) here in toronto Canada We also use sun chemical but only A few colors white oxi for foil paper and A...
I would like to re- set the delivery grippers on my press its a LS 29 2007 Komori should this be done by a servise tech or can I do it . it seems...
Thanks I will check it out I am wondering now that this is my problem with running long grain stock and it not delivering right...
