Hi I've got a problem with the electronic double sheet detector when running 80g offset.Even when it's set it will let doubles and triples through...
Hi, does any one know how to speed up the response on the register. When a unit is selected to move in any given direction the response is very...
Does anyone have a sure fire way of printing 80gsm offset at speed? All other stocks are ok. I've tried so many ways with sheet separators/ Air...
Does anyone have a sure fire way of printing 80gsm offset at speed, every other stock is fine. I've tried so many ways with sheet separators/ air/...
Hi, The R300 that I'm new to has serious marking problem mainly on the tail edge when printing anything over 170gsm.All the transfers are spotless...
Hi, I've got a problem with a unit tinting towards the back edge of an A2 sheet, on a Roland 300 mainly on the drive side.All rollers are set good...
hi.some of our ink key buttons on the PQC are not reacting when i need to reduce the amount of ink ( KEYS 6 and 8 ). can you buy individual...
hi, i'm getting gear marks from my dampers, especially, when printing solids.The damper roller is approx 6 months old and done 12 million...
does any one have a manual for a grafix digitronic 3000, spray device? In the last 2 weeks weve been getting setoff.Ive blasted all the lines out...
was wondering if bearer pressure between the plate and blanket cylinders effect print length.the 528 which i run has the bearer pressures set 2...
hi, does any one know, what the small "toggle " switches do on a grafix spray powder device do? i know that they make the device pulse.Do you set...
hi, im having problems with my metering rollers inking up throughout the day, im having to clean them at least twice a shift. i'm using...
i have a problem with the tail edge of the plate coming out of the clamp during the run. its PQC so there are no spanners involved. The clamp...
have a problem using process less ctp plates on a 528. After say 1000 impressions small lines starting at the grip edge of the plate start to...
hi, ive just recently got a job on a 2002 528 after 18 years on Heidelberg. ive noticed a problem in print length on the 3rd unit and the jobs...