Hi CHOCK, Many thanks once again for your concise message, I about to try and get these things you have suggested and see what result, if any I...
Hi CHOCK, Thanks once again for your reply, I was wondering, how would I know which sensor or switch this may be? The error is back today, but...
Thank you both for your messages. In a very strange set of circumstances, the machine is now working again. No errors. What I did: - moved...
Not sure whats available in the USA, but for Europe and Africa we use paper from European and Chinese sources. European stuff from a mill called...
Just to clarify, I have two errors: 1) Fault with operation 2) Malfunction in cabinet.
Hi Everyone, Trust you've all been well? I have an error with our SM74-6P3+L 2001/626 This is the order of events: 1) Press turned off, gone...
Quick update on this one... The potentiometer was left disconnected on the coating unit. Problem still occurring, therefore - the engineer has...
Think you can get a 'designer' to add the bars for you in Adobe Illustrator for each imposition, think the procedure is fairly simple. Hiten
Engage the dampening system on your press instead of printing sheets until the plates wash out. Also try and look closely at the plates, maybe...
Oh dear... another power voltage fluctuation and a few more cards gone. So followed the same process and found that there will still some issues...
Thanks for all the helpful replies so far. As an update, I had a heidelberg engineer look at the press and he says that a faulty potentiometer...
Thanks for that, I shall try and do that and see what we get back. Hiten
Thanks for the replies. I have checked the printing pressure and the packing, they are both ok. Just to confirm, how would I check the exact...
Dear All, Strange errror! Half way through a press-run, the machine cuts out the feeder and the machine stops. All the 6 units have the yellow...
Hi Nimesh/Waqas, I got the both REK 1 and REK 2 boards back from the engineers today. Installed both the boards and turned on the machine, and...
This is the picture taken by an engineer who came to have a look at it, I noticed that it is not on the 'dyn test' [img]
Hi Nimesh, Thanks for your post once again. A day ago I sent across the REK1 board to a company here that is able to repair complicated...
Nimesh, There were two option on the service menu and the one with the T and round arrow was pushed, the error with 0000 was still blinking....
Nimesh, I have no idea on how to run the dyn test, would you be able to guide me? Thanks, Hiten
Nimesh, Thanks for responding to the thread. The 0000 was blinking on start-up of the press on the console. The machine will not do...