A1 594 x 841 mm (Millimeters) 23-3/8 x 33-1/8 in (Inches) 7,012 x 9,938 pixels at 300 dpi (Dots per Inch) A2 420 x 594 Millimeters 16-1/2 x...
Is the final product fine art photos to print or for general brochure-type printing? I would want 300 dpi as a baseline standard resolution for...
Does it happen only with 8.5 x 11 or also with 11 x 17? Can you print 1 copy and then another 1 copy and then another 1 copy with no issue?
Glad you resolved that. Thanks for posing what it was too. I think I replaced the 2nd btr rollers once on mine. How many prints on the drums?...
What budget do you have for the printer? Are these labels on standard weight stock, such as Avery labels, or something that is more difficult to...
Did you solve it? How old was the ink cartridge. I've had old hp ink cartridges (a couple years beyond the expiry date) do something similar.
Did you already clean the cleaning blade assembly? Or replace with a new one. Toner will build up in the auger over time if not cleaned. Sometimes...
I don't have a HP M283; the menu on the printer should have a test print function to run a test print from the printer itself. See if those colors...
In my experience the tolerances of toner quality aren't huge. I think this is more likely to not work than to work, and I would be ready for the...
Have you tried different color settings when sending prints to your current HP laser printer? Are you working in CMYK or RGB? If you send a...
What size and volume do you want to print? Most small desktop inkjet printers won't load difficult, high texture, irregular, or very thick stock...
Laser printers that cost less than $50,000 usually have a small 1" pickup wheel to pull the sheet of paper from the tray and another small 1"...
What do you mean "super low resolution quality"? Laser printers are best with 300 dpi input minimum. 200dpi can work sometimes. Lower and you'll...
As far as the glossy paper not drying, getting the correct glossy paper for the inkjet you're using is critical--and where inkjets can be fussy....
Laser can be better. It depends on many things. I've been able to do short run books profitably on larger laser, but not really on inkjet to date...
Welcome to the forum. It's hard to get started. What kind of print quantity do you hope for within a year or two? Have you tried printing on...
Feeding and fusing would be issues. If the bags are very small, there are some envelope laser setups that might, might work. I emphasize might....
What size are the mylar bags? What quantity do you run at once?
If you can use 60# cover or lighter a small printer could be able to do it. 80# or heavier, and I wouldn't consider it on anything smaller than a...
It will be difficult to get a good paper supplier with volume less than 10,000 sheets per month. It's easier to get industry pricing if you're...