thanks for all your advice but i have been doing this job for 15 years now been with heidelberg and roland so i do know abit about presses but...
does anyone have the info on how to remove the ranger drum gripper bar and refit it i have a customer whos cam follower and bearing blocks that...
hi there have you put a clock on the cylinder bearers to see if the cylinders are running true? are you getting colour veriation on the back edge...
the units weigh 7 ton each
I have just done some work on the plate clamps changing the escentric adjusters and setting up the register on the front edge clamp but i dont...
Hi all I am looking for plate clamp laterial and circumferentuail register setting info and also gripper timming and feeder timming I realy hope...
well what you got i have a customer with a sm 74 so what ever info you have would be very greatful
I would love to come and do the job but i live in south africa
Hi all i am looking for some mechanical info well as much as I can get on the SM 74 Hope there is someone out there that can help me out many thanks
hi there johnyprint if you give me your email adress I will send you some info its shows you have to set the pretention on the infeed drum but the...
Hi Johnyprint on the opperators side of the either the transferter or the impression cylinder there is an cap which fits onto the end of the...
check your lamps as Topper has said but also the refectors as they also get dull and cause problems as I have had this before in the past
have you set the torsion bars on the transferter and the impression cylinder gripper shaft,what stock are you running and is your pre tention on...
hi there i have some R300 control info you can email me at andrew.hagart@hotmail.com
thanks very much for the help laurowu i have emailled you asking you for the diagram of the proceedure hope you have it to email me hi exheidmech...
are you getting movement or is it constant and are you getting any double on the print??? mabey try and put a micron clock on the plate cylinder...
Hi there all does anyone have info on the GTo 52 swing arm I need to take it out and set the bar up but unsure how to do it hope someone can help...
also check if they are using the correct blanket packing and if they are using the correct impression jacket as on the heidelbergs if you use the...
hi there I am working on an Oliver 58 at the moment and the pressure between the blanket to plate on impression is 0.03 dont know if they use the...
Hi there sorry i have looked through my 600 mechanical note book and they dont say the weight of the units but the R700 is 9ton per unit so I...