here are the 5mm solid color bars for the 30.75mm and 35mm key 40" press. there is a 6c and 8c version. also a pdf on using the bars
I may be able to help, do you have the 35mm keys or 30.75?
Hi Jeff, I believe Demer's does sell replacement clamps here is a link to there website, look under HBG offset, then under plate clamps...
Sorry for taking so long, here's the charts I have [IMG] [IMG] hope this helps -Dana
Here's the charts I have [IMG] [IMG] hope this helps -Dana
I think i could be, the "A" form 1st revolution from lead. old lithrone (64.5 diameter "A" form), gap length. Both measure 203mm (7.99")...
I've made my own side blowers with Loc-line parts. i used a regulator, and some plumbing supplies at a hardware store (pipe adapters, and a ball...
Last I knew there is no belt that for the dampening unit. There should be a spur gears for the metering & pan roller and a motor geared to the pan...
some one on ebay is selling a couple of replacement Arrow Tryren horns for $629 each:eek:, the seller is Cintinix. here are some of the tunes...
this should help you out http://www.printersadvantage.com/expert/docs/Ink_Roller_Settings_PM46.pdf
I believe in 1814 Koenig came up the the term "perfecting" as shown in this book on page 17...
Hi, the only packing i've seen is this stuff, which is made by SunShine Paper Company, LLC. You might be able to order it through POSCO. A...
We don't have a dryer on our press, Pierry IR does make one that fits the press. I believe they take out some fans/blowdowns to fit it in. We...
We have an older lithrone 28 and a newer spica 29. we also have a slight stripping problem on the lithrone 28. we use calicumfix from bottcher...
The press works very well for us, the only downside which isn't surprising with single diameter impressions are the transfers between the...
At my shop we have a 2004 komori spica 429p. It some point I'll post some photos and videos. We also have a 1995 komori lithrone 628+C.
I run an older 1995 Lithrone 628+coater. I'll post a video one of these days. Soak up every bit of info from the Komori Tech/Installer. On the...