Well, I don't know about you Ziggy33, but in my experience (30 years) going from black to white aint that easy. You must be using some nasty...
Humidity, temp, paper, too much fount, too much IPA, plenty of areas here that might influence poor drying and rub resistance. A quick lick of...
Does your press have a clutch drive for the water form? I.e. speed reduction drive? Also if it is always on the drive side then it sounds...
Depending on the size of your press, the number of wash ups per day, the ink you use, the number of hours the press runs per day ALL have an...
When you mean register, do you mean plate register? The R300 uses small motors to move the plate laterally and circumferentially, but the cylinder...
Yeah, XL105's are a good machine but you won't better an R700 on shrpness of dot. The drive system is I feel superior to the Heidelbergs, plus...
Is the stock short or long grain? This could also be affecting things. Also check you are not running too much water on one unit as this may leed...
Hi TC Rex, If using conventional inks then are you using foiling inks? These will help with drying. You could try a drying aditive also. But...
Hi Luke, Yep you are right. I am a rep!. Yes the compound is only available in a 25 shore A, but this is perfect. 20-22 is an American...
Hey Luke, Bottcher developed the technology (ProAqualis). You are right it uses a similar surface that repels the water like teflon but is...
Hi, Don't use Jif, it will only add to your problem. Use a proper Calcium remover (Bottcher make an excellent one). Using Jif will cause fine...
