can you turn the image around so the heavier coverage is at the gripper? also try to see if you can let your form rollers oscilate.......
http://www.gansink.com/calc.asp try this......^
http://www.gansink.com/calc.asp try this formula.........
Ive used liquid cobault in my fountain sollution , dont like to make adds to the ink as I think most offset inks lately seem to work well on most...
"You may need a more agressive black formula or an increase of Photo initiator for bottom cure." true , you can add more and also running slower...
what kind of problems? and what kind of powder spray unit? oxy-dry , graphix?.......Im running an older press with no IR and just a puffer type...
Interesting blog there.....I started reading the NG story you wrote......I rememeber looking forward to recieving copies of NG every month!...
? are you asking about printing a solid or overprinting a light color? not sure here.........
not sure Im getting this... 4/c process with 2 pms colors ( one being a metallic) and spot varnish? 7 colors? is the bump color the pms and why is...
But the never fail fix is to cock the image a little on the plate so that there is no circumfrential straight line takeoffs on the form. works...
if you just want to measure densitys yeah I guess that should work......k -180 c-120 m-135 y-95.....get yourself an idea of what your target...
we dont even use alcohol here....you learn to print without it , but there isnt any substitute thats for sure........ " I have no testers....
"ps. throw that febo in the trash! It is an unneccesary product and junk in my opinion" not only that its hard to get out of the...
Yeah theres a couple of ways to calculate ink usage , you should be able to get from your ink supplier , its just simple math......like area of...
thank you both , I reset the swingarm grippers etc....its been running great and holding perfect sheet register!....as far as going back to paper...
get an air gun and blow the line out.....or slow down the feed;)
Toyo always had a heavier pigment load....but some are going away from that true , I try to stick with the higher quality ink manufacturers cause...
"tinsel grounded in water "^ dito and fabric softener....this can be a frustrating problem!....good luck.....
if all the roller settings seem fine and your crown is correct I may try a different set of inks.....seems odd that 3 units have the same prob and...
Yeah but right now its the only game in town , aint many print jobs around....