Hie guys, am running an LS40 2002 model. The machine is having what I suspect to be an electrical problem. When printing first side it is running...
Hie guys I'm running a Komori LS440 and of late I've noticed we having problems with air pressure. The machine runs on 6 bars but now at times i...
Hie guys I'm having problems with my water temperature. I set the roller chill roller temperature to 30°C and the fountain water to 10°C but...
Thank you guys for your responses, did bypass and found out that one of the units was faulty it had a poor connection somewhere on the circuit....
Hi guys what causes PDUC 2 & PDUC 1 error on an LS 440. When it gives that error the metering roller starts moving slowly like crawling speed. The...
Hie Guys I've been struggling with this job for sometime now. It's a grey job color values as follows. Cyan-60, Magenta-50, Yellow-46 & Black 39....
Good day Guys. I'm struggling with my roller cooling system. The cooling rollers/chillers are getting way too cold and water ends up condensing...
Which machine are you having problems with? We had our Spica 29 changed the plate clamp on the 3rd unit.
Thanks guys for your responses the problem was solved by loosening the worm gear holder and pushing the worm gear to the other gear and we...
Hie guys am running a Komori LS40 and am having a problem with the first unit blanket getting loose during the run. I have to tighten it after...
With this one you need to get Komori Electrician, something is tripping the printing units before they should go off.
I am binding a 88pg booklet on a Muller martini Presto but for some or the other reason it does not get the wiro through the booklet. I even...
We using a GRAFIX DIGITRONIC 2000 not a Weko. Since we stopped using wedges the problem seem to be gone, we just have a little sett off maybe one...
Thanks guys for your response, we seem to have overcome the problem. We have been using wedges and since we stopped using them things have changed...
Hie guys we running a komori LS440 & we having problems with set off on the tail edge, in the corners of the paper. Have checked the nozzles &...
Rolandman this guy said 1200(thousand two hundred) or 1300(thousand three hundred) check that on his post.
I beg to differ the delivery is great, am sure your settings aint right. We have this machine and am shocked by what you saying. Check on your...
Is this on all the units or one unit? Did you check all your oil seals on the oscilating rollers?
Had almost the same problem on our LS440 and it turned out to be the encorder. We just replaced it & all was well. I have a spare one if you need one.
Initialy you said training is provided how are you going to be trained? You need to talk to your management about training because as you have put...