The pressure gauge might be located in different spots from model to model, maybe ask the guys from Heidelberg just to double check thats its...
We changed our pressure gauge, the one you insert into the coupling. Costly but it solved the problem. They are super sensitive and dont like to...
double post
More details? How does the actaul job look like, maybe the nature of the job is the problem?
If its only happening on one unit its probably settings. Off the top of my head: Check form rollers are seated correctly in bearing cups. If...
This could possibly be your side lay profile. Its the channel or key way that the side lay follows. If this profile is worn the timing goes...
I agree with trying to swop the roller with the old one, if the problem is still there, then you know its not the roller. Also check the side...
Are you sure the thread on the side bracket or roller is not stripped, your thread could be worn and with the vibration when ideling the roller...
Yeah, have a look at that spring adjustment as suggested, it could restrict it from dropping all the way.
Stick with what you have, mechanical is the way to go, you have full control over the setting. Its going to cost you to buy and then it will...
What I understand, bumping or to bump is to run the sheets under impression to remove or clean up the sheets before the first color goes down...
I would go absolutely nuts, first of all they dont respect the machine, and then they dont respect the supervisor. 1st Warning, 2nd Warning,...
We run a Heidelberg CD102 and print opague white all the time on metallic paper. It works well, you just have to work closely with the ink guys so...
Please check the vibrator roller. Check the roller diameter and bearings for play. We had something similar and it turned out to be an undersized...
It is the experienced pressmans attitude towards his work that launches him to the highest level.
Make a 100% sure that the sheet is arriving into the lay all squared up. Meaning - no wavy bulges or sqewing. Sometimes the paper can react...
They started coming off randomly, we would only find out when we experienced doubling. It would cause an uneven setting across the bar. We would...
Common problem, we have since gone back to metal.
Give the stock you printing on to you ink supplier and let them test it and provide you with the correct ink that will work. From your post it...
Custom stickers will be better to do digital, I would think that these would be very small if not single quantities. Litho / Flexo is more for...
