If run on an offset press, it depends on the ink used. I think 7-10 days is a good safe number, but there is a good chance 3-4 days would be...
Does anyone know how thick, in thousandths, of stock you can get through a Xerox C75/J75 without damaging anything? Some really spongy papers can...
Did you ever find a solution?
I have had experience with the 560 and the C75, though not after as many impressions as your machine. We had almost 400k clicks on our 560 when...
Here it is a few months later and we just finished upgrading from our 560 to a new C75. We had just shy of 400,000 clicks on our 560 when we sent...
Watching the Fiery University videos on Color Profiler Suite, they keep mentioning that you need to have both your RIP and your printer calibrated...
We just upgraded to a C75, and without guaranteeing any number of clicks per month, we were given a 3.8 cent per click rate for full size sheets.
Have the developer units been checked?
Thanks for the post. We never use the internal trays, except for 20#. Without the OHCF this machine would be useless for us. Currently we can...
With the volumes we are doing though we still have the machine sitting idle much of the time. Until we are keeping it running 8 hours a day I find...
I don't claim to know much about color management so if I talk like an idiot please bear with me. We are running a Xerox 560 with a bustled Fiery...
We have regular mailings with variable data on both sides that account for around 15,000 13x19 clicks per month. Then, partly because we are so...
On our Xerox 7556 we have Xerox Pagepack which supplies our consumables and service with a set click charge. On that machine I would sometimes use...
Hi Jeff, That gloss patch mode would be of some interest. If it performs like I expect. I have to say that so far I am very pleased with the 560....
We recently got a Xerox 560 with an oversize feeder and so far we are very pleased with it. Last month we ran just shy of 100,000 clicks on it. Of...
So you think that you won't get click charges that are as low on a used machine? We leased a 560 last week and seeing these cheap used ones just...
We tried using 3rd party toner in our 7760. The problems we encountered were poor coverage on solids, didn't seem to stick to some sheets as well,...
The way I understand it you can sign up for metered supplies and service on a used Xerox digital press. Since you can buy a lightly used 700 for...
At our print shop it has a breaker for each piece of equipment and boxes for each area. We have 220 volt 3 phase power for a total of 600 amps.
I really can't understand why you would be having this problem. Are the blacks your running 100% black? I have noticed that rich blacks don't look...