Commonly known as a “Heidelberg Windmill”. Not much use for these machines any more, quite specialized applications, such as die cutting and scoring.
Changing packing at transfers is done to lessen the amount of space between transfer and impression cylinder, to reduce marking and slapping. The...
Artificial intelligence…is just that:D
Yes, you must post pictures of INIT test errors.
Have you reset boards? (Unplugged and plugged back in). Cables in cabinet, too.
This issue may be due to the urethane being worn down on gripper fingers. Apply a strip of tape over holes on pad surface of traveling feed...
OK, hopefully one of the guys with more CPTronic expertise can get you sorted out.
“Motor mechanically blocked”. What model year? Sounds as if a servo, which would likely be active during production, is faulting out...
Ah, electronic double sheet detection coupled with early sheet.
Still shouldn’t, Jack.
By the way, why would the double sheet make it down to headstops?
Early sheet caused by extra thickness would certainly make sense, as Adil noted, machine would stop.
Excellent! Now get to work :>)
Codes translate to communications errors, so the first thing you should do is turn power off and reestablish pin connections of all boards in main...
I read too little into your original question, new info changes things.
Rewinding and refurbishing an AC motor of that type should only take a week. Even if the journal(s) are scored due to a failed bearing, such a...
Not likely. Check your error display for low solution, water and pneumatic pressure at tank.
Two brass pins on front of board, short out with screwdriver or similar item for a few seconds.
Model year?
Highly recommend inspecting the brushes on both the slip ring and commutation. Simple to do, remove covers and examine with flashlight. It will be...