Brokering I've been printing for other printers for 30++ years. I am now and an owner of a shop and a lot of my work is outsourced ( brokered),...
I have a bareback dampening system on my GTOZP, couple of things to note is insulate the pans ( water troughs) !!! The condensation drips off...
I've been searching for some time now for a set ( or two ) of blanket bars for my GTOZP 52 as well as a set of speed plate clamps. I keep coming...
4-5MM roller to plate, a little less to the oscillator. Set the oscillator first.
I had this problem and it was the feedboard set too low. I was running pocket folders through it, imprinting a logo on the front cover and had to...
It is more looking like a relay / contactor. In the morning it's fine but during the day it acts up. I seen an arc on one relay this morning and...
My inching forward is missing when I depress the button and seems to be worsening, as well sometimes when I depress the run button the slow down...
What grain powder are you using?
I use process colour wax in my 2/2 applications. Never a picking problem seen. That tip from an 80 year old Swede with 60 years experience....
You can do that if you want or print the ready made envelopes on the press.
The feeder on the Ryobi's are fair to poor. I would trade up for a GTO Heidelberg. They are excellent machines for feeding envelopes and hold far...
Heidi If you want to do it cheap and the quality is fair to good find yourself and old Heidelber TOK for a couple of grand, and a polyester...
Your form roller setting are out. Read the operators manual and reset your rollers. Also use Van Son rubber based ink. Formulated for dampeners....
Air in envelopes I run cmyk envelopes on my GTOZP all the time. It's a pain in the butt but cooks along at 5500 IPH hairline in register. I...
kidding You get an impression for each printed "cycle". Meaning on a 4 colour you get a count for each finished sheet.