It normally comes up 00-00 Swifty, but sometimes 11-07.
That's the one swifty - it's actually the bracket that it sits in that's come off. I've glued it back but the height of the glue must be effecting...
The sensor came loose on my QM46-2 a couple of weeks ago - I stuck it back down, but it's constantly halting the machine on feed errors. Spoke to...
Thanks FSA - have sent a PM :)
Was looking to add Letterpress to my printshop but don't know the first thing about them! :o Am I correct in thinking the Platen unit can be...
Thanks Sunny - it was actually a 2 colour unit I was considering but I get your meaning. William - thanks for all the info. It's looking like the...
Was something I was going to ask too actually as the ordinary QM offset suffers from contamination due to the common blanket - I thought on the DI...
Not sure about oldfart (and I don't want to hijack his thread) but I've done a bit of reading/searching and there's a few specific questions I...
I'm also looking into DI - would appreciate any info if anyone wants to PM/email.
Thanks - I've been reading up a little on the DI machines today. Most sources seem to suggest the Ryobi is superior but they seem pretty scarce in...
I hadn't actually William - I'd read a little about them when first released and had heard a lot of teething problems with them but will have...
Thanks for the input Rossio. We already do some printing so have the CTP, pressman & guillotine already - the only requirement would be scoring....
Thanks for the input data - we had looked at an Indigo 1000e but, being older technology, I really didn't think it was up to the job. Did you have...
Was hoping someone could give some advice - I have a small business designing greetings cards. At the moment I farm out most of the manufacturing...
Thanks for the info Henry - don't have a roaming function but spoke with a presstek engineer today and managed to get it sorted. Newbie mistake as...
Hi Albuq, Yes, it's within the sheet size - the 340mm roll is loaded in the media manager as having an actual width of 339.7, so I've also set...
Was wondering if anyone could help - I'm still quite inexperienced with my DPM and trying to get to grips with a little problem. I use a 340mm...
I seem to be getting increasingly squeezed by Presstek for the Megapro plate rolls for my DPM - I know these are proprietory but I was wondering,...
Thanks tm, good tip - I know I should really move to indesign, it's just that my requirements are so simple (easily fulfilled by pagemaker) I have...
Hi Jeff, Thanks for your input, helpful as ever :) I made a mistake in the initial description actually - the page is supposed to be mostly blue,...