I'm looking at changing the blades in our fore edge trimmer, does anybody have a guide on how to do this. Top blade doesn't seem to be cutting...
Does anybody know of any independent uk based (northern ideally) prepress engineers that could remove and refit the auto loader to a...
We have error code 03 coming up on our alcosmart unit for the technotrans beta. Any ideas how to clear it? Thanks
we’ve had all the covers off and cleaned all the sensors, we do this regularly anyway. The puzzling thing is tray 1&2 are clear but 3-10 are...
We were running away today using trays 1-9 then after stitching 9000 books we had an error come up saying sheet jam in trays 3–10. We have...
i need to replace the cover plate that the hook on protection foil hooks onto on a sm52, i can see there are 5 allen screws holding it but is...
Thanks for that.
That sounds spot on exheidmech, as i actually tried that today and thats what happened.
No its doesnt centre up at all once it speeds up, only when it goes down to 9500ish. It's not even as if it is checking all the time once it...
We've been having an issue with sheet arrival on our sm52. Once the press gets past about 9500sph the display start showing that the sheet is...
Could somebody tell me what the 'L-C' stands for. Thanks
Print101,I had thought about doing what you suggest with putting the sheets through under impression, if we get the problem again i will try that....
If it was the press why would it run ok first side and not the second? The doubling/slurring is front to back. Tried different batches of the...
It has around 89 million on the clock, i had thought about something like that but do you think it would affect one side of the sheet so much?
We have recently been printing a job on an SM52-5 that when backing it up we have been having problems with the image doubling/slurring, the job...
We seem to have a developing problem on our polar 78, on a morning it cuts perfectly but as the day goes on usually after 4-5 hours the blade...
No, not using poly plates.
Cheers for that Mech will keep that in mind. Had a look at all the cam followers today and they all seem pretty solid. One thing i forgot to...
It seems to be more of a length issue, than width. It seems to be worse when using grammages of 200 and above, it doesn't seem as bad when were...
