Exactly Mr H'berg.........do not understand the problem here.
Well prepper I think your operator is pulling your chain.......I see no reason to be having this issue with this punch system. I think you need a...
My company is getting ready to put rollers in our 6/c heidelberg. As with everything today there are issues on pricing. I have contacted several...
You all seem to be right on, the densitometer is a "tool" to get fine results and to get you in the ball park. The customer sees the finished...
I got perma pack under the plates and am sitting at .004, I tried to get him to take packing out don't just rely on the guage. Got to start...
We have an older model Hberg press here and are putting some pleasing color work on it 4/c . While this press has some years on it she can still...
I agree with the last part, when you only do these once or twice a year it gives you a scare until they leave the plant. I off loaded the racks...
oxy dry 36
I have run Yupo before but this stuff is much nicer. It did set up fine we did most of it on Fri/Sat and on Monday it was dry. But what bothered...
I am running this on a 6/c heidelburg. My concerns are about drying as it is a pretty good load of ink. There are a lot of builds and that is...
Will try thanks a bunch for help, not too many people bit on this one.....appreciated.
I had this issue some couple years ago with Kodak plates. Seems the plate looked great then started printing run a bit then image would actually...
I am running this press and the oil light is on and the warning bell is ringing. I have replaced the oil filter at the delivery end ( filled new...
Ok nosefo email should be to you by now......thanks
I tried getting an email to you but it is not formatted correctly.....morten#aske.no is what I typed in but would not go.
OK thank you....as I said I run a onestep solution and it gives me 4.0 ph. To get a higher ph will probably have to change my solution( no big...
Finally some help.....Now you say orange skin look, as in a mottle or emulsified ink?? We do get a bit of emulsified ink but mostly on the ends of...
make sure your tail vacumn is working and set to the correct lenght of sheet also check the eye between units with a clean white cloth to see if...
Marcus get in touch with me I have some issues with our Solna and not to many people have them around here.Pleasr.
I run a 4 color Solna heat set web and I have a serious issue. I am getting a lot of rollback or feedback of ink onto my water feed rollers. I...
