First thing you will want to do is calibrate the lasers. Follow the steps in the operators manual chapter 4 in the maintenance section. Try not to...
Since your DI has the pds-e, it is fairly easy, but not always as accurate as desired. I'll post again with step by step directions on how to get...
It's a lengthy process to explain... What RIP software does your DI use? Harlequin...Delta...etc...???
That is your Sheet travel jam detector.
Due to variables on the camera...light distance to image, age of film etc... I'd suggest making some test shots with different F-stops and time to...
The thing I've found is to convert spot jobs to cmyk, that usually resolves that issue. As far as transparencies...I place all images in the back...
Even if the configuration is different between the various model years of the press, the IR fuse should be located somewhere in that section of...
Be sure the press is off when changing the fuse :) I think the fuses cost around $15 US dollars each. I'd recommend having a few spares on hand.
I circled it in red... [IMG]
In the black box...it is always best to check the fuse first, as it has to be working before you can test the IR bulbs. If one bulb is burned out,...
lol...that is what our current operator does...he doesn't know how to do color correction or at least chooses not to.
Using Pantone spot colors in printed jobs can give mixed results. Ultimately, I convert everything to CMYK and use TRC's to control color is the...
You cannot print impression on units without engaging the form rollers. Simply by using unit 4 for varnish, the other 3 units will still remove a...
That is normal to a degree. When you have coverage that is shared by more than one color, cross contamination will occur. It is probably more...
I'd recommend to at least calibrate your lasers and test your curve to see what results.
On the console side of the press, move the console out of the way so you can remove the large panel on the press. You must first remove the top...
There is a fuse behind the lower panel next to the console. Not sure if the power requirements are the same but the # on the US version is...
I somewhat experience what you are talking about. The only thing I can think of is a combination of two factors. One being that the ink's...
That is normal, as the press is releasing form rollers from the plate during a stop. The yellow form gets released before the sheet makes it fully...
I found that depending on what I am trying to match from a previously printed piece, I use different profiles to achieve closest match, then...