Replacing the K Dev bias board should solve the problem. Have replaced just about everything else besides the dispensing motor, which I don't...
When putting in a new dev unit it does keep coming up with an error 092-317 ... changing the NVM 762-315 from 3 to 0 does clear the error. This...
I found the following on another website ... "Biggest flaw is with the toner delivery system/developer housings. Here's the issue in a nutshell:...
2 days ago this machine started printing a very faded black (maybe 20%). Have replaced the drum with no difference. Replaced both black toner...
The little chip at the back of the machine had to be reseated. Has PWBA CPL1 written on the little board with a brass plate either side. After...
We start the machine fine, go to print and it asks to replace R3 drum. Put in a new drum and the error remains. Turn machine off and the error is...
Am having the same issue on our Xerox 5065II which is very similar to the DC250. Everything was working fine, disconnected everything and blew...
plate cleaner, plate gum, etch, solvent, roller wash, blanket wash ...
There doesn't seem to be any electrical problems. There is a lever at the front of the press has a graphic on it that shows the slot (groove)...
OK, I feel the sheet is not being detected at all. I can manually engage the solenoid in place and it works fine, numbers ink and turn perfectly....
OK, I have adjusted the form roller for the numbering unit. The problem appears that the impression is not staying on, so the numbering machines...
Having a lot of trouble trying to ink up the numbering machines. Does anyone have a copy of a manual for the number / perf unit for a Itek 985...
Yep, played around with the dampeners and it seemed to have fixed the problem. Thankyou for the help, mush appreciated. We will definately know...
On our shinohara 66IIP we every image has water streaks going through the entire image. They are very fine going in the same direction as the...
I would be interested in parts for the following: KORA Itek 3895 Ryobi 480KANP KSBA Shinohara 66IIP Thanks
Ok ... taking the plate out of the clamps, oiling up the plate/blanket did absolutely nothing. However, we all sat down for a while and 2 of us...
We don't have a 56, we have a 66IIP but I would get it checked out by an electrician first, and if he doesn't find a problem get your engineer to...
Thanks for the reply, We have taken out all the rollers on both heads as suggested, the machine is off and we still cannot move the machine. The...
We are running a Shinohara 66IIP and seem to have a problem that we have never encountered. We have a sheet of card stuck between the blanket and...