replace developer
you did not mention linearizing and calibrating both via the printer and the use of i1 in CWS?
I can tell you how to find out. Print the bicycle image ( iso 300 i guess). this image is the standard image for calculating the yield of an...
just set up or want to know the whole process of creating ICC profiles?
try cleaning the drum and transfer belt via control panel, then print the calibration via panel, check the magenta ramps. if the ramp is clean...
service is also an issue here in the philippines both brands. if you are going to use it for proofing, better get an epson, heads is considered...
that is always an issue with T1
quality and color wise, i pick epson. speed i pick canon
Best way is PDF. the print buyer should know what color space they should work on during the file preparation.
You need a spectrophotometer and a profiling software to write ICC profiles. 6500? is that a KM?
yellow should be in 0 or 90 degrees
you,re right xpquickprint. belt fuser has a problem handling heavy stock even the specified paper like the 5180. the max is 250gsm but the printer...
try to go to efi website
you might want to check your paper if there is an OBA. During the creation of profile, you should have check the box for correcting the OBA. This...
where did you get your simulation profile? Is it customized by you?
You can only notice the damage when you print a 12x18 in or 13x19. At about 2 in from the end side, about 1 to 2 mm thick lines start appearing...
Imagepress C1 can only handle up to 256 GSM. Beyond this specification like 300 gsm will damage the fixing roller. I wouldnt do that if I were You.
C1 resolution is 600 dpi not 1200. It is enhanced or interpolated by the rip, but by default it is 600 dpi.I have tried 1200 on the C7000vp by...
Activate the department ID.
It maybe good in your place, but when humidity fluctuates, the color fluctuates too. Specially on gray and dark parts. And using a good paper.