I have purchased replacement Blower Motors from Grainger for my Heidelberg' s and my Horizon booklet maker for around...
Try backing off 1 and 2 to find out which one is doing the banding.
You can back off # 3 form from the plate and that should help on the magenta unit.On the yellow unit check your forms, It sounds like your forms...
What size sheet are you running? Is the toning a single bar across the sheet? if so measure from the grip to the tone bar.
You can try and increase #3 form to 3mm. This will help some but ghosting is one of the DI's Achilles heels.
You are right on the money; Ink means a lot on these Presses. The dryer seems to cause more trouble than the powder.
I need a cooling fan for the power supply (ours went bad). With all the Air planes grounded I can't get one. Hedi part # A4.114.1055 Any ideas?
I have a QM that will not load or eject plates all the sudden.. The Press will just Idle instead? Any Ideas what too look for?
I am looking into having someone print a piece for me that requires a large press (at least 48") that can Print on 18pt. c1s. I can't seem to Find...
Be sure your Blanket washer Is pushed in all the way.. =(:confused:
Exactly Mr.H
Is the paper black on both sides? Is the Press a perfecter?
The swing arm does open enough for the thicker stock, the trouble is on a 26" sheet the sheet gets pulled against the lower pad or the head-stop...
We have a SM-74 that does not like 26" 100# cover, when the pull guide pulls that size the sheet wants to catch on the head stops....
??? We print 4 color all the time on ours.. It's all in your ability as a Pressman......
Yep. What is your E-mail
He is doing his own press repair thing. ( Maybe he can use your expertise some times? )
Have You heard from Fulmer?
I ran a QMDI PRO for Five Years and the Blanket washers never worked very well. They required a ton of maintenance and if you ran any ink coverage...
Did you try to send the file to the Press and view it there>?