I have an MM Starbinder 3006 but without gauzing station. Can I add on this unit in between gluing station & cover feeder? Thanks.
My machine HDD is Toshiba, but I am cloning with Hitachi.. Cant work. Ok, will try to reach Adil. Thank you.
Hi sir, yes I tried both cloned the HDD sector to sector and change the 2x original HDD to my cloned 2x HDD. The HDD is with same volume but not...
Dear all master, I am trying to clone the 2 harddisk, the cloning was successful. But unfortunately tested the clone harddisk it can boot up to...
Brake changed, coil serviced , cable connector checked. Still the same problem.
Was during production, its keep stopping. But if without production seems still same, we tested to lift up/down the delivery.
I am wondering is these?
Dear Mathew, here is it..
I am facing this kind of error, the machine keep stopping. And the motor (as attached photo) is hot.
1) I have reset earlier but still the same. 2) I have also so some cleaning on the board, but will try to do in detail again later. Will try...
Dear guys, my POlar 115E is having Error 16, can I know what is the root cause? We did checked:- - Battery on KC2 board : OK - Cable : seems no...
Dear all master... My both gripper up/bottom is out of position. Any manual/method how to adjust back in right position?
This is with English
Hi all master, my 115X not able to turn auto mode, anyone can help?
Hi sir, mind to share how you solve the BRK 16 error?
Hi Chock, yes sorry maybe our technical is not good enough. Yes the voltage is in tolerance, I will inform my team to check the coil again. Thanks.
Yes I know sir. I have checked the voltage and coil, seems nothing problem. I have attached a photo again.
Sir, I have checked. The voltage seems fine, but still the same problem.
Hi to all master, my folder KH-78/82 having this error 2-0013 Main Contactor. Just wondering what is the problem? I have change the K3 & K11 aux...
Hi sir, yes we have rectified it that day due to other reason. Thank you. By the way, you have any idea for this issue? When setting, want to drag...