Yeah, you should go with the 7000 instead... btw I run a 5600 in my country and the machine is outside of service contract, and let me tell you...
Hello, well I remember I was told the same way, to just apply IO under the tail of the PIP. But afters years on different presses and working with...
Yes I had, It seems you need to replace your cleaning station wiper blade, when they get old start to cause this printing issue, it begins to...
What have you tried in order to fix? - Try swapping the scorotron with another one to see if its the scorotron itself (in case the error moves to...
Yeah, well I guess there is not other option than rebuild, I'd wish this press had the silica gel filter system, it really helps a lot. I'm...
Does anyone know how to do this? I've always been told that this is conductivity related, and certainly I've noticed than after replacing Imaging...
Are your 3 power supplies on when you turn on the press? I mean do the green lights on them turn on?
It reminds me a lot of a problem I had some years ago, just in case verify all of your interlocks are not disconnected. I had a problem like this...
Good... It's is weird that even with different batches of pips the problem stays the same. I'm suspecting of a problem with your cleaning...
Does this effect is present on any color? On the same position? - It doesn't seem like IO contaminated but, how are the readings of the Imaging...
What issues are you having on your printed sheets? so we can have an idea to help you
Make sure your ink is well calibrated and the sensors are clean. If your bid is new and v-electrode never calibrated, I suggest you to use a new...
I think before dealing with WH parameters and all that stuff you have checked some other things first. 1- The gray color you are printing is it...
As titles says, I'm a little bit concerned about the Israel situation so I wonder if HP Indigo division factories are being affected or will be...
Those canbus problems are the worst to me... have you tried to swap BDU? So you can see if the problem stays on the same BID or moves to the other BID
It has never happened to me but, aren't they restored if you load a press backup?
Hi, I know you have done a couple of things and you have good knowledge of your press, so I will try to suggest just a couple of things more. Take...
Have you checked the Ink Flow? Have you performed Bid Electrode Calibration? Have you tried swapping BDU with another unit and see if the streaks...
Well, it looks at decent range man. Did it overflow oil again today? The only two things left I can think of, is a problem with the Imaging Oil...
That's pretty weird as I had that issue before on a 5600, and the symptoms were basically the same and only after changing the wires it was...