We have a Lithrone 528. We've cleaned out behind the clamps with a degreaser and some hot water-plate finisher applies gum arabic as an...
Pressman is telling me he is having an issue with the 3rd unit plate clamp slipping. We've been through the manual and haven't found an adjustment...
Mechanic called with reply Mechanic gave me the info I needed. Ends of rollers are threaded and can only be removed by unscrewing them. Once...
I have a call in. I spoke to a guy in their parts department and he's going to have a mech. call us. I asked the parts guy if they had a more...
Have a 5 color Komori 28. Yesterday heard noise coming from roller train. Tracked it down to the X roller, copper oscillator. Bearings fine,...
Komori I couldn't see how changing the gear would affect the impression either. Just another coincidence of printing. Appreciate the info &...
Komori Thanks for your help. We had the press running over the weekend and the unit was back going on impression. Pressman told me this had...
Yesterday we replace the plastic gear in the 4th unit for the water metering unit as the gear was starting to chip. Today, the 4th unit isn't...
Area cutter mechanic was able to diagnose over the phone. I had told him icon appeared on screen, hear valve click on but nothing from the blower....
I called a local cutter mechanic and they said it was an overload. Reset breaker and all is well. Mike
The air tables on my Polar 115 just stopped working. No error code on the display. All other functions are working. Went through manual, no help....
Lamp Thanks for the reply. We cleaned under the pad and that Did the job. Mike
Old inverter was sent back to Komori. They gave us a partial credit (20%) on the new inverter so they can rebuild the old one. Mike
Pressman just told me he has a Lamp Failure DSD. It says electrostatic double sheet detector failure. Is this something we can replace the part...
Turned out to be the fan on the back of the motor. Bearings in fan were shot so we replaced the fan. All was good for a month when we started...
Final outcome. Once fan was installed the noise & problems went away. De-installed new drive and checked press again. All is OK. We shipped back...
Here's where we stand. New fan motor came in Fedex 2 minutes ago. We are going to have the fan swopped out. Check press. If no error code & no...
Installed the new drive. Now it's the fan on the motor. Error code uU went away. GOing to deinstall the new drive and see if the error code...
Error we are seeing on drive is uU. Which the manual says is low voltage. Dan checked the taps on the transformer. An also bumped the voltage up...
Komori Thanks for the info. Tony in Chicago told us it was the optical incoder. Have Dan from komori coming back in the morning. He told me...