Thanx for the reply Steve . We r meeting with our ink and coting rep to discuss the issue. The weird thing is that we have been running the same...
We have recently been experiencing a problem with gas (chemical) ghosting appearing on jobs that we print with a matt aquueos coating. The problem...
Me 2 Id like to hear about it!
If there is only a small amount of ink coverage i find segregated works best. Although if your roller settings r good it shoundnt matter. Good...
check the suckers that r outside the sheet size u r printing r turned off. good luck gazman
T This might sound silly but are duct membranes properlt fitted ? As 4 Heidelberg or non heidelberg duct fols i belive the heidelberg ones r...
What kind of cyl repairs are u talking about? Where the cyls actually removed fom the press or wher they repared on the machine?
Is it possible to change the timming of lateral ink distibution on this machine? If u can maybe have a play around with that to see if u can get...
Dear Grant What kind of coating r u currently using and what was the old one that gave u grief?
Hi Guys Lately when we run a matt aqueos coating over black solids we tend to get lines running down the sheet grip to back edge. I have tried...
Try some Varn compound 747 i find it helps with dryng without adversly effecting ink chemistry and as Mr Heidelberg said add a touch of cobalt...
Iam using saphira Fs-13 fount runs well except 4 the occasional picture framing.
Gday Richard I used toyo hy-unity for about 3 years found them to be ok but the mag did seem to leave alot of calcium deposits, had to de-calcify...
thanx 4 all the tips. Had a simular job and ran the gold on unit 1 with a good result:)
Running a SM-74 when printing gold 872 i seem to get a pin hole effect. Job was run in following sequence k,c,m,y,872,gloss varnish. Paper used...
alot of printers are having issues with hostman inks not drying in australia. Try DIC Fusion G ink or DIC Diamond inks i have had no problems with...
u could try printing a dry solid this would tell u if its a dampner or ink form
I tend to agree with The Heidelberg Guy the intermedite (z roller) should be set @ 2mm to the water form not 4 to 5 mm this is far too heavy
The Technotrans is type:IF2-EX Part Number:154.24.42? couldnt make out the last didgit I hope this is enough info Thank 4 your help
Thanx for all the info, it seems that i am being called into yet another meeting with agfa where they are going to inform me yet again that we are...