Thank you. Drive side journal was froze up. Got it free, all good now.
Is there pneumatics on both sides of applicator roller?
Is it a CAN dryer. If so you will find a bleeder valve ( looks like a tire valve stem) , in line, above and to left of fill port. Remove cap and...
Will try to get some pics. Thanks.
Sorry for the delay fellas, too busy with production to test things out. Press is '06 CD74 5 color/coated. Set timing by feeder wheels at...
Not getting any error codes, so.... New info from the manager. Apparently the previous operator (possibly mgr), damaged the wire running to the...
Feeder won't stay timed. Can set timing at feeder head but won't hold, especially at high run speeds. Any better ways to set timing?
Not sure where that is. Encoder replaced is past according to manager. Can reset timing by loosening bolt in feeder head and adjust but doesn't...
Hi all, another on going issue with my machine. Feeder keeps getting out of time even though I reset it. Any ideas what the problem is.?
Yes, I agree Tom. Unfortunately the three places I looked are sold out due to people who believe it will work for body temperature. Probe was all...
Hey Steve, thanks for the tip on blast air setting. Set at 60% and was able run air knives up at 85-90% on 1st pass with matte aqueous, and 70-75%...
Thanx but we apparently don't have that update. That's the problem on auto though, air knives and IR go down to 10% to maintain set temp of 98F....
Could be cooling issue however, getting low pressure error every few weeks or so. Don't remember having to charge the unit that often. Thank you...
Yeah, talked with Heidelberg tech via phone about pump. He says if it's turning it's working. It's turning so.... management doesn't really want...
I usually have to run soft touch at slower speeds anyway for curing purposes.
Not sure what type of feeder/ feed table system you have but you should be able to crank up vacuum on feed belt or tighten the wheels/ brushes...
Probably getting too hot and trips breaker. Put a fan to blow on it for a temporary fix.
On CD 74 there is a breaker for scroll star compressor in electrical cabinets left of varnish pumps.
It's a CAN dryer. Not aware of a thermostat to check. Pump it turning. Recently replaced a pressure valve however.
Thank you both, Tom and Steve. The evacuation seems to be working but haven't been able to check helper fan on roof of building. I perform...