Thank you Drukman. We tried to zero out in the PU but the error 90 did not go away. We had to cut out the plate because the PU would not let us...
So we had the error 90 on our Man Roland 304 machine. We swapped the Weko board between units and the error followed the board. (blue box in the...
Same here - we are a little scared to try the disk and have never seen this done before.
We changed out/ swapped the Weko board (blue box inside the door) from unit 3 to unit 2. The error 90 followed to unit 2. Is this because the box...
Can you ruin something by putting the CPL service disk in? We are having the error 90 on unit 3 on our Roland 304. If we run the CPL service...
Hi Drukman. How do we go to auto zero? The flash memory? Hard drive in the console?
Hello guys, What can we do about error 90?
Can i do an automatic calibration without any DOS to get rid of the 74 error?
i will let my tech-guy know.
Do you do this via facetime or phone?
If we change out the potentiometer - does it not require to do some adjustmest or calibration? We have a new potentiometer in house. We change...
Hello guys and a happy new year to you all. We have a CP Bourg bb3002 and it has been stopping allot with the error BLOCKED EXHAUST. We se no...
The PC keyboard works but the commands are limited there. There are no stored jobs the prepress menu. We always adjust pre and on the fly. It...
It seems that only the buttons on the right go out from time to time. (where you register and adjust etc) Ink keys work and also the PC keybord...
We dont save any jobs in the console.
Can the battery be causing this and a slow response in the console?
Hello fellow Man Roland printers. Our 300 machine is behaving a little odd. The console is slow and sometimes you cant do the commands on the...
Hello there, There are errors in our console. 1. SPS: Feeder zig-zag pile 2. see photo. The machine was restarted and it went away. Any ideas.
Thank you Asim, I saw the same problem on this chat board some time ago. There was some adjustments or calibrations needed on the unit. Is it a...
Hello guys, We are having problem on our Man Roland 304 with the Error 74. (plata change on black unit) Restart and the problem goes away for...