Run your water speeds low metalized paper can carry a lot of water. Use a large micron spray power since you dont have UV .Run small tiers 750 to...
Just a quick check, make sure the brake handle is straight up from the motor. not pushed towards the press. This is a quick check, ran an older...
Im gonna throw this out there.Disclaimer I am a Pressman not a Tech. Not much Komori experience but have some. Those lower pictures you posted...
Always look for answers inside your own questions. 2 different machines at the same time. whats different ? Machines are different. Is the ink...
Not familiar with the 3302 gripper system. But make sure you dont have individual adjustments for each gripper on the delivery bars. If so open...
Well depends if you mean cures or "adheres" there's a difference. Going EB technology is about as "dry" as it gets. But UV is dry but may not...
If you think your cards are good.......try unbolting said trouble motor and bolt on another you know works.....quick easy way to eliminate the...
I think he means after the first safety beep the press jerks and moves but (brake engages or misreads) does not start. thats exactly how it goes....
check to make sure your brake bar handle is straight up (usually yellow) not towards the press and not away. If this is the same issue I have...
When running metalized stock you need to start with water speeds way down, possibly 25 to 35 % less than runnin say c1s or a form of text paper....
Going by your picture the stroke is set at 18 and the physical setting on the gear box appears to be 18 . Check the gears on the top of the...
OK so we have established that you are toning.....You have not replied stating you have tried any suggestions that you have gotton from anyone in...
OK so it does show up or it doesnt ? on the sheet. If your blanket is fine and you changed chrome rollers to different units. Then start...
Could be lots of things. Something that comes to mind right away is how old are your blankets. If blankets lose the ability to release ink...
Possible sheet wrinkling also by the looks of the picture. Curl of stock prior/simultaneously to entering infeed. I cannot see the entire sheet...
https://eaglepressrepairs.com/
More than likely what you have is a "double" sheet . A piece of paper from previous sheets rips off and sticks to the blanket of the press and...