Dear Junker, Thanks for your reply, please clarify me two things, that, I mentioned problem is in 4th Unit not in 5th unit. So, which board will...
Yes, Dampening system go off
Speed Master 102FP CP Tronics SL No: 530 647 MFD- 03/04/1990 Dear all, We facing a technical issue that, while doing printimg, Dampening Roll get...
Machine was working fine before
Hi all, can you tell me about this error 555, I don’t have manuals for this machine. Machine had been not using more than 6 months, and now...
Thanks for your suggestion ..!!
Hi all, I would like to change the hydraulic oil on subjected machine, could you please guide me for below., which hydraulic oil can use? Tank...
Changed hydraulic oil and air bleed done in the piston cylinder, now clamp pressure getting perfect.. Thank you for support..!!
Thanks for your reply, In my case, If 15K47M contactor get activated, motor works fine. ( checked, manually activated by pushing). means voltages...
Dear All, Subjected machine, when the power ON the machine, grease motor M47 not working, means 15K47M contactor’s coil A2 not getting Signal. If...
If we swap this motor to another machine, problem also get transferred. Drive belt looks new. I forgot to say one more point in previous thread,...
Hi All, Recently Heidelberg main motor had Rewinded due failure, after rewinding the motor, machine can run faster without impression ON, if...
Not yet Sir, Let me change the hydraulic oil and check (I couldn’t attend the machine today) Shell tellus C32 is the mentioned oil in the book.
Hi Mr. Chock Thanks for your detailed reply, Back gauge problem and knife problem have sorted out, position sensor was the reason. Existing...
Hi all I don’t know this machine problem can ask here or not, facing a technical issue on our machine. EBA 721-06 LT GUILLOTINE SL NO: B...
Replaced sensor, working fine Thanks Chris Goff.
Hi Chris Goff, Thanks for your reply, we are off today. I will check and update you.
Hi all, Subjected machine, if the paper get cross on feeder board, feeder Head stops taking paper as normal, But when we try to print again, press...
Hi all, After shifting (relocation)of our speed master four color machine, first day noted impression problem. (while shifting, machine two units...