Hello, The machine does not want to start, displays error E10 (main IX), the engine does not even move, the inverter shows 0.00hz. without...
I have already checked and found a fault. Probably the driver will be all. The 2.2uF capacitor has burned, making a hole. I am in the middle of...
Thanks. I thought it was only a transmitter and the driver's engine is on the door (WEKO 204152) Do you have more information on how to get...
I have a calibration error so I will definitely have to do it.Can you tell what this procedure should look like? Can a blocked motor not cause...
Where exactly is this engine driver? I thought that the motors are inside the cylinder and the WEKO controller is connected only via a WEKO...
Hi guys This time I have a problem with the perimeter register engine. The problem started when the disc could not be removed. The board has not...
I am very sorry that I am only answering now. According to your advice, I solved the problem after proper adjustment and carrying out the opening...
I want to finish this post. I solved the problem by repairing this BKF12 interface module. Now everything works well. The input system was damaged.
@drukman Does the price concern a repair or a remanufactured module? Can I send the module back after putting on a new one? Maybe I can still...
1k € ? $?
Problem is 100% with Comunication module 3.9493C on the BKF12. When I bend the module, the machine starts and works properly. The problem is...
You would be able to briefly describe how to start working on this program ?. Maybe you would have what documentation to learn?
I found !
My email is qba@gtx.pl
Thank you for the hints. Unfortunately, I don't have CPL software, I don't know how to use them either ;-( Tomorrow I will try to disassemble...
Thanks for the answers. This is my CPL. Can you mark and describe step by step how to disassemble it correctly? I'm a beginner Man Roland service...
Hi. I have a problem with Roland 304 no. 27245B The problem concerns the motor M63 mounting plate with CPL, the motor does not work. Error 64...
Please ask colleagues what are the most common defects.
Yes, the problem was found and the problem is with the interface/communication card on BKF12. I resoldered all the elements on the board again,...
What is RTR? Encoder is connected direct to BKF, Cable 100% OK, I also made a new one with plugins. The encoder replaced another one used from...
