Before you disable the eye witch is very risky make sure the sheet guide is seated properly and the suction hose that holds the sheets are working.
Also I remember Tac generator needed to be re placed good luck
Could be not sure 30 years since I ran if you have manual there should be a fault page.
Move The bar between plate and blanket cylinder see if red light blinks on and off
See if you have a dirty sensor underneath it may need clean.also check that blanket guards are not hung up
Thanks for the update
You will have much better results with silicone jacket note.they need to be cleaned daily no harsh chemicals
What issue are you having that you want to change the packing?
There are resources in the city of New York.reach out to General printing office if you can. Or maybe University of Rochester. They had a large...
You are in the right place but not the right section.you may be able to talk to printing community in the copier section of this forum.also I...
Yes
Put 2 strips of paper between the bridge and ink form drop rollers and dampner turn screw until paper can be removed with no drag
They had one in place I last worked.all who had anything to do with the pooplo are now gone from this Earth
Is the timing off?
Yes less water check your stripes
Contact Demers in Florida USA
The potentiometer on motor is not good change
Good luck
Good explanation Raff.its hard to diagnose if you can't see sheets delivered.hopfully Alistair can have a technician show him.