we have a xeikon 9800 with the web finishing module. can anyone suggest a good coating to use, and ifit is available in wax free
we have a xeikon 9800 with the web finishing module. the operators have bumped up the coating on this module to protect more of the toner . i run...
does anyone know if they make a suction infeed (one without the marbles or top plate ) for a folder /gluer machine thanks .
I run a mark Andy 2200. We run waterbase and uv ink. Can you use waterbase ink to print on plastic or should it be uv ink for plastics.
Running a g& K folder gluer. Running a 27# sheet 32 pages, how many sheets of paper should I put in the calipers while setting up job .
Just wondering if there was a alignment screw or something for the belt that drives the paper into the folder on the alignment table; it's kind of...
How often do you need to clean the infeed belt on a g& k folder? And what should you use to clean it? Thanks Steve
I know maximum sheet size on my Heidelberg zp sm 102 (1993) is 28x40 ,what is the absolute minimum sheet size I can run
thanks for the information
possibly but never tried
that's what I am doing. have to run a lower density due to show thru, and change fountain solution often because of we have the plates that...
im running a 1993 sm102 zp.we basically run black over black type work on a 28x 40 ink sheet of coated 60 lb text.we don't not have any ir drying...
I think I got it running ,im sure I was not getting a proper signal cleaned sensor and all connections and it started to work.thanks again for all...
Thanks for you help
I have an old grafix digitronic spray powder unit. works when on impression but the shaker doesn't work only works on test.any ideas how to solve...
if its curled board that's causing the problem , heidelbergs in my experience do not like to run curled board very well. try braking the stock to...
No Heidelberg sm102zp using a cito rsp 2.0 system that take the place of the blanket
having a problem with my grafix spray powder ,it runs when it comes on impression ,but the shaker does not shake,when I put it on test shaker...
thanks for you help . I don't use unit two ,only for die cutting so I ran the air from # 2 to #1 .
Had my mechanic come in and do some work.my wash up tank was trash ,washed up manually.remove the tank because we don’t use it.heres the problem...